Measuring Inside Recess

All of our blinds are made to measure, please follow the instructions below carefully. Please make sure you take your measurements using a 'STEEL' rule or tape.

If you are uncertain where you want to hang your blinds, please call us or send an E-Mail.

Measure the width from wall to wall at the top of the recess.
(from A to B).

Measure drop from top to sill (from C to D) in several places.

You should use the smallest of these measurements.

Measuring Outside Recess

All of our blinds are made to measure, please follow the instructions below carefully. Please make sure you take your measurements using a 'STEEL' rule or tape.

If you are uncertain where you want to hang your blinds, please call us or send an E-Mail.

If you select "blind size" we will make your blind exactly to your sizes. So please read the definitions of blind size below very carefully.

Measuring Vertical Blinds

For Vertical Blinds, "blind size" is the exact size of your blind.

Measuring Roller Blinds

Width of a roller blind is measured from bracket-to-bracket.

The width of Fabric on your roller blind will be 35mm less than the bracket-to-bracket width.

If you require a certain width of fabric, you will have to add on 35 mm to this fabric width measurement to give your "blind (bracket-to-bracket) width"

The most common reason for giving "blind size" is if you wish to hang your blind outside of the window recess.

In this case you would decide how much you wish your blind to overlap the recess. Use the simple guide below to calculate your blind size.

Width of Blind = Width of Window Recess + Overlap
Height of Blind = Total Height of Window Recess + Overlap

We will make your blind exactly to these sizes.

Other reasons for giving "blind size" rather than recess size would be if you intend to hang your blind within the window recess and you know how much you need to deduct for your blind to fit perfectly.

Or you are ordering a blind for a situation where there is no window recess, for example in a conservatory

Or you only want the blind to cover only part of a window.

Bunch Styles

Choose from left hand or right hand blind bunching.

This applies only to vertical blind products.

Louvre Size

Track Location

On which side would you like the control for the blind?

The Control operates the angle of each louvre and also allows you to draw the blinds. (see bunch style)

Choose the side that will be easiest to access.